Arohan Seals is one of the trusted Resin Carbon Seal Face Manufacturers in Mumbai, which provides high-quality sealing components for mechanical seals for pumps, compressors, mixers, agitators, reactors and rotating equipment in various industries. High-performance resin carbon seal faces have been produced with state-of-the-art vacuum impregnation technology and high-quality carbon graphite materials and strict engineering specifications to provide a high sealing capability, excellent wear resistance and extended service life. Our seal faces allow for reliable leak-proof performance in harsh operating conditions for use with water, chemicals, oils, solvents and mild acids and industrial fluids.
Our field of Phenolic Resin Impregnated Carbon Seal Faces, Furan Resin Carbon Seal Faces, Epoxy Resin Carbon Seal Faces, FDA Food Grade Resin Carbon Faces and Resin Bonded Graphite Seal Faces caters to various shaft diameters, pressure levels and temperature ranges. Arohan Seals has a special interest in quality, dimensional accuracy and durability and is a popular choice in industries like chemical processing, pharmaceuticals, wastewater treatment, food processing, marine systems, automotive cooling systems and petrochemical industries with its cost-effective performance. The quality of each seal face is subject to rigorous review and precision finishing by our experienced engineering team, providing reliable sealing in every application.
A Resin Carbon Seal Face is a high-performance, self-lubricating sealing component that is the major sealing face in mechanical seals. It is produced by vacuum impregnating porous carbon graphite with synthetic resin to fill the tiny pores and interconnected voids inside the carbon structure. This infusing process renders the material very dense, waterproof, strong, and almost impermeable to leakage.
The natural existence of raw carbon graphite material also has microscopic gap defects produced in the production process. These holes can provide a pathway for fluids and weaken the material when subjected to stress. When the carbon is impregnated with the special synthetic resins like phenolic resin, epoxy resin, or furan resin, the seal face becomes more structurally stable, more likely to withstand compression, has a lower porosity, and is more resistant to wear.
Resin Carbon Seal Faces are popular due to their self-lubricating qualities. When operating, tiny friction produces a fine carbon transfer layer over the mating surface that provides protection and lubrication. This decreases friction, generation of heat and severe wear at start-up or temporary dry running.
Since resin carbon is relatively soft and compliant, it is always used in combination with harder mating faces like Silicon Carbide, Tungsten Carbide or Ceramic to achieve maximum sealing performance and operational life.
They are widely utilised in centrifugal pumps, water treatment plants, chemical processes, food-grade processes, marine and industrial rotating machinery, and pharmaceutical equipment where reliable leakage control is essential.
Arohan Seals is one of the top Resin Carbon Seal Face Suppliers in India, offering high-precision sealing components for different industrial uses. We deliver top-quality seal faces with timely delivery support to all the major industrial hubs, including Mumbai, Delhi, Gujarat, Chennai, Hyderabad, Pune, Ahmedabad, etc., with consistent quality.
Our Resin Carbon Seal Faces are made with high-quality carbon graphite and a state-of-the-art resin impregnation process that provides exceptional dimensional stability, low friction performance, high chemical resistance and long operating life. We have solutions for sealing balanced, unbalanced, cartridge and custom mechanical seal designs.
Our Resin Carbon Seal Faces are preferred by industries due to their:
We manufacture Phenolic Resin Carbon Faces (for general industrial application), Furan/Epoxy Resin Faces (for aggressive chemical handling systems), FDA-approved Food Grade Carbon Faces (for hygienic applications) and Resin Bonded Graphite Faces (for economical low-duty applications).
Arohan Seals specialises in offering competitive pricing, manufacturing solutions, technical support and superior industrial sealing solutions for challenging operating environments.
The Resin Carbon Seal Face Price in India depends on various factors including seal size, material grade, resin type, pressure rating, operating temperature, surface finish quality, and application requirements. At Arohan Seals, we provide premium-quality Resin Carbon Seal Faces at highly competitive market prices while maintaining superior quality and performance standards.
Industries requiring standard water handling or low-pressure systems can choose economical phenolic resin seal faces, while aggressive chemical processing and high-temperature applications may require advanced epoxy or furan resin impregnated carbon faces.
|
Seal Face Type |
Shaft Diameter |
Face Material |
Pressure Rating |
Approx Price |
|
Resin Carbon Seal Face |
25 mm |
Carbon |
Up to 10 bar |
Below ₹300 |
|
Phenolic Resin Carbon Face |
35 mm |
Carbon / Ceramic |
Up to 20 bar |
₹301 – ₹600 |
|
Epoxy Resin Carbon Face |
45 mm |
Carbon / Silicon Carbide |
Up to 20 bar |
₹601 – ₹1,500 |
|
Furan Resin Carbon Seal Face |
55 mm |
Carbon / Tungsten Carbide |
Up to 35 bar |
Above ₹1,501 |
|
FDA Food Grade Carbon Face |
65 mm |
Carbon / Ceramic |
Up to 20 bar |
Above ₹1,501 |
|
Heavy Duty Resin Carbon Face |
75 mm |
Carbon / Silicon Carbide |
Up to 35 bar |
Custom Pricing |
|
Parameter |
Available Options |
|
Price Range |
Below ₹300 |
|
Price Range |
₹301 – ₹600 |
|
Price Range |
₹601 – ₹1,500 |
|
Price Range |
Above ₹1,501 |
|
Seal Design |
Type 1, Type 2, Cartridge, Balanced, Unbalanced |
|
Shaft Diameter |
25 mm, 35 mm, 45 mm, 55 mm, 65 mm, 75 mm |
|
Face Material |
Carbon, Silicon Carbide, Tungsten Carbide, Ceramic, Steel |
|
Elastomer Material |
Nitrile Rubber, Viton, EPDM, PTFE, HNBR |
|
Pressure Rating |
Up to 10 bar, Up to 20 bar, Up to 35 bar |
|
Temperature Range |
-20°C to 120°C |
|
Temperature Range |
-20°C to 180°C |
|
Temperature Range |
-40°C to 220°C |
|
Business Type |
Manufacturer, Exporter, Wholesaler, Retailer |
|
Business Credentials |
Annual Turnover ₹5 Cr+ |
|
GST Registration |
Registered 3+ Years |
|
Supplier Location |
Ghaziabad-based Suppliers |
Arohan Seals provides affordable and customized Resin Carbon Seal Face solutions for pumps, compressors, mixers, agitators, reactors, and rotating equipment with dependable after-sales support and fast delivery across India.
|
Technical Parameter |
Specification |
|
Product Type |
Resin Carbon Seal Face |
|
Material Type |
Resin Impregnated Carbon Graphite |
|
Resin Type |
Phenolic, Epoxy, Furan |
|
Seal Design |
Type 1, Type 2, Cartridge |
|
Design Configuration |
Balanced / Unbalanced |
|
Bulk Density |
1.75 to 1.85 g/cm³ |
|
Porosity |
Less than 4% |
|
Compressive Strength |
200 – 220 MPa |
|
Pressure Capacity |
Up to 35 bar |
|
Operating Temperature |
Up to 220°C |
|
Shaft Diameter Range |
25 mm – 75 mm |
|
Face Materials |
Carbon, SiC, TC, Ceramic |
|
Elastomer Materials |
Viton, EPDM, PTFE, HNBR |
|
Mating Ring Materials |
Silicon Carbide, Tungsten Carbide, Ceramic |
|
Application Media |
Water, Chemicals, Oils, Solvents |
|
Mounting Type |
Internal / External |
Resin Carbon Seal Faces are available in different configurations based on resin type, operating environment, pressure handling capability, and chemical compatibility.
|
Seal Face Type |
Description |
|
Phenolic Resin Carbon Face |
General-purpose industrial sealing applications |
|
Furan Resin Carbon Face |
Excellent chemical resistance for aggressive media |
|
Epoxy Resin Carbon Face |
High solvent and alkali resistance |
|
FDA Food Grade Carbon Face |
Safe for food & drinking water applications |
|
Resin Bonded Graphite Face |
Economical solution for low-duty systems |
|
Component |
Function |
|
Resin Carbon Face |
Primary sealing surface |
|
Mating Ring |
Provides hard contact surface |
|
Elastomer Seal |
Prevents secondary leakage |
|
Spring Mechanism |
Maintains face pressure |
|
Metal Hardware |
Structural support and mounting |
|
Gland Plate |
Holds stationary components |
All Resin Carbon Seal Face components are precision-manufactured for smooth operation, accurate face contact, and long sealing life.
Arohan Seals is a renowned name in Resin Carbon Seal Face Exporters in Mumbai and provides top-notch sealing solutions to the industrial market in India and abroad. With the international engineering standards and high-quality raw materials, our export-quality seal faces provide perfect sealing performance, high accuracy and durability.
Being experienced exporters, we are able to offer you the solutions you are looking for in consultation with you, taking into consideration your specifications, shaft sizes, operating pressure, material compatibility and the industrial applications requirement.
Our high-performance Resin Carbon Seal Faces are widely trusted across multiple industrial applications for their excellent sealing reliability, self-lubricating performance, and superior wear resistance.
At Arohan Seals, every Resin Carbon Seal Face undergoes strict quality inspection procedures to ensure superior sealing efficiency, durability, and operational safety.
Replace and upgrade your industrial sealing systems with Arohan Seals Resin Carbon Seal Faces that are precision-engineered, durable and leak-proof, boasting superior wear resistance, smooth operation and long-lasting sealing performance.
From water pumps, chemical processing, compressors, mixers, marine and rotating industrial machinery applications, we provide customised sealing solutions to meet your specific application needs.
Enhance your industrial equipment performance with high-quality Resin Carbon Seal Faces built for durability, efficiency, and dependable sealing reliability.
Rigorously tested, precision-manufactured seals
Pan-India dispatch network
Direct manufacturer — no middlemen
Technical guidance before & after purchase
The right material pairing directly determines how long a seal lasts and whether it handles your process fluid without failure. Below are the materials available for this seal type — we select or recommend based on your application.
Self-lubricating with good chemical resistance. The standard rotating face material for general-duty and water pump applications.
Springs, glands, sleeves, and retainer components. Corrosion-resistant structural integrity across all seal types.
Material selection depends on your process fluid, temperature, pressure, and shaft speed. Contact our team for a recommendation specific to your application.
Arohan Seals, one of the reputed Antimony Carbon Seal Face Manufacturers in Mumbai, provides top-of-the-line heavy-duty
Arohan Seals is trusted Silicon Carbide Seal Face Manufacturers in Mumbai, provides best-in-class hard face sealing solu
Arohan Seals is one of the most renowned Tungsten Carbide Seal Face Manufacturers in Mumbai and provides ultra-durable s
We are trusted Ceramic Seal Faces Manufacturers in Mumbai who have been developed to offer reliable sealing up to the hi
Decades of precision engineering behind every seal we produce in Mumbai.
Every order can be tailored to your exact dimensional and material specifications — no catalogue lock-in.
We supply across India and export globally with reliable documentation and logistics.
Talk to our team — get the right product, right price, and fastest delivery from our Mumbai facility.
A resin carbon seal face is used in mechanical seals to prevent leakage in pumps, compressors, mixers, agitators, and rotating industrial equipment.
Resin impregnation fills microscopic pores inside carbon graphite material, improving strength, reducing porosity, and enhancing leakage resistance.
These seal faces are widely used in chemical processing, pharmaceuticals, food manufacturing, marine systems, wastewater treatment, petrochemical industries, and industrial pumping systems.
They offer self-lubricating operation, low friction performance, superior wear resistance, chemical compatibility, smooth sealing performance, and a long operational life.
Resin carbon seal faces are commonly paired with silicon carbide, tungsten carbide, or ceramic mating rings for enhanced sealing efficiency and durability.
Yes, Arohan Seals provides customised resin carbon seal faces based on shaft dimensions, pressure ratings, operating temperatures, and application-specific industrial requirements.
At Arohan Seals, we don't just sell mechanical seals — we solve sealing problems. Whether you need a standard replacement seal or a fully customised solution for a demanding application, our team is ready to help. We manufacture across a complete range — single spring, multi spring, bellow, cartridge, and agitator seals — and export to clients worldwide. Quality you can trust, delivery you can count on, and technical support whenever you need it.
